Qseven® conga-MCB/Qseven ARMShort description of the congatec Qseven® ARM mini carrier boardShort DescriptionRevision 1.0
Copyright © 2014 congatec AG QMCAm10 10/362 Connector LayoutThe connector layout picture below shows each connector and its name des
Copyright © 2014 congatec AG QMCAm10 11/36Bottom Side conga-MCB/Qseven ARMMini-PCIe Card Socket(half or full size)SIM CardSD CardRTCm
Copyright © 2014 congatec AG QMCAm10 12/363 Specications3.1 Mechanical Dimensions• 95mm x 145mm• Height approximately 15mm (top
Copyright © 2014 congatec AG QMCAm10 13/364 Connector DescriptionsThe following tables describe the pin assignments for the connecto
Copyright © 2014 congatec AG QMCAm10 14/36Pin Signal Description Pin Signal Description59 HDA_SYNC/ AC97_SYNC/ I2S_WSSerial Bus Synch
Copyright © 2014 congatec AG QMCAm10 15/36Pin Signal Description Pin Signal Description107 eDP0_TX2+ / LVDS_A2+ eDP Primary channel 2
Copyright © 2014 congatec AG QMCAm10 16/36Pin Signal Description Pin Signal Description157 PCIE_CLK_REF- PCI Express Reference Clock-
Copyright © 2014 congatec AG QMCAm10 17/36Pin Signal Description Pin Signal Description227 VCC Power supply +5VDC ±5% 228 VCC Power
Copyright © 2014 congatec AG QMCAm10 18/364.2.2.1 AT/ATX Mode Selector - Jumper X65Jumper X65 congures the power supply to operate
Copyright © 2014 congatec AG QMCAm10 19/364.3 Fan - Connector X39Connector X39 is a standard 3 pin header for fan connection.
Copyright © 2014 congatec AG QMCAm10 2/36Revision HistoryRevision Date (yyyy.mm.dd) Author Changes1.0 2014.05.23 AEM • Ofcial releas
Copyright © 2014 congatec AG QMCAm10 20/364.4 HDMI - Connector X35A high resolution monitor can be attached to conga-MCB/Qseven ARM
Copyright © 2014 congatec AG QMCAm10 21/36The X66 camera connector supports up to two MIPI-CSI 2.0 data lanes. The MIPI interfaces fo
Copyright © 2014 congatec AG QMCAm10 22/364.6 UART - Connectors X59, X60The conga-MCB/Qseven ARM provides two UART interfaces - UART
Copyright © 2014 congatec AG QMCAm10 23/364.7 LVDS - Connector X14The conga-MCB/Qseven ARM supports a dual LVDS Interface with DDC d
Copyright © 2014 congatec AG QMCAm10 24/364.7.1 Panel Voltage Selection - Jumper X31Jumper X31 provides the ability to select the LC
Copyright © 2014 congatec AG QMCAm10 25/364.8.1 Backlight Voltage Selection - Jumper X32Jumper X32 provides the ability to select th
Copyright © 2014 congatec AG QMCAm10 26/364.10 Auxiliary Audio Header (Line-IN/Line-OUT) - Connector X45The conga-MCB/Qseven ARM pro
Copyright © 2014 congatec AG QMCAm10 27/364.12 Ethernet - Connector X3The conga-MCB/Qseven ARM has an RJ45 connector with integrated
Copyright © 2014 congatec AG QMCAm10 28/364.14 GPIOs - Connector X57The General Purpose Input/Output pins are available on connector
Copyright © 2014 congatec AG QMCAm10 29/364.16 Onboard Android Buttons - SW1 - SW10The conga-MCB/Qseven ARM offers the follow
Copyright © 2014 congatec AG QMCAm10 3/36PrefaceThis short description provides information about the components, features and connect
Copyright © 2014 congatec AG QMCAm10 30/364.17 mSATA Socket - Connector X2The conga-MCB/Qseven ARM provides mini-SATA connector on
Copyright © 2014 congatec AG QMCAm10 31/364.19 SD/MMC 4.0 Card Socket - Connector X9The X9 socket on the bottom side of conga-MCB/Qs
Copyright © 2014 congatec AG QMCAm10 32/364.21 CMOS Battery - Connector M12The conga-MCB/Qseven ARM includes a battery that supplies
Copyright © 2014 congatec AG QMCAm10 33/365 Additional Features5.1 Red LEDsThere are two red LEDs found on the conga-MCB/Qseven ARM
Copyright © 2014 congatec AG QMCAm10 34/366 CablesThere are several cables that can be used with the conga-MCB/Qseven ARM mini carri
Copyright © 2014 congatec AG QMCAm10 35/367 Mechanical Drawing115958754544165151554 x R3145137113.15
Copyright © 2014 congatec AG QMCAm10 36/368 Industry SpecicationsThe list below provides links to industry specications of the int
Copyright © 2014 congatec AG QMCAm10 4/36SymbolsThe following symbols are used in this short description: WarningWarnings indicate con
Copyright © 2014 congatec AG QMCAm10 5/36TrademarksProduct names, logos, brands, and other trademarks featured or referred to within t
Copyright © 2014 congatec AG QMCAm10 6/36Technical Supportcongatec AG technicians and engineers are committed to providing the best po
Copyright © 2014 congatec AG QMCAm10 7/36Contents1 Introduction ...
Copyright © 2014 congatec AG QMCAm10 8/361 Introduction1.1 Qseven® 2.0 ConceptThe Qseven® concept is an off-the-shelf, multi vendor,
Copyright © 2014 congatec AG QMCAm10 9/361.2.1 Feature ListForm FactorBased on Qseven® form factor specication revision 2.0In
Comments to this Manuals